Doktor Jons Guide to the "Use and Application of CCTV"
The "News and Views" Section - Manufacturers Press Release

So would you like to play "Spot the CCTV Camera?". Eagle eyed visitors may recognise the profusion of street furniture, surrounding a single heritage dome camera keeping watch over part  of Londons' prestigious Oxford Street shopping area.So would you like to play "Spot the CCTV Camera?". Eagle eyed visitors may recognise the profusion of street furniture, surrounding a single heritage dome camera keeping watch over part  of Londons' prestigious Oxford Street shopping area.

- Press Release - 9th December 2008

 

Altronix Access Power Controller Receives UL Listing.

ACM4 Provides A Scalable Cost-Effective Access Control Solution.

 

Brooklyn, NY (December 8, 2008) -- Altronix, the leading manufacturer of low voltage power supplies and related accessories for the electronic security industry, announces that the ACM4 series of four output access power controllers have received UL listing. Each product in the ACM4 series routes and distributes 12 to 24 volts AC or DC for operation and control of access hardware devices. Four independently controlled outputs may be individually selected for fail-safe or fail-secure operation. 

Two models, Altronix ACM4E with fuse-protected outputs and the ACM4CBE with PTC-protected outputs, are housed in enclosures and may be utilized to expand the number of outputs for any UL listed power supply. The ACM4E and the ACM4CBE have received UL listing in the United States and Canada. These units are also available as ACM4 and ACM4CB which are sub-assemblies without enclosures that carry the UL mark in the United States. 

The units’ outputs can be activated by an open collector sink or normally open (NO) dry trigger input from an access control system, card reader, keypad, push button, PIR, etc. Fire alarm disconnect options include normally open (NO) or normally closed (NC) dry contact input and polarity reversal input from an FACP (Fire Alarm Control Panel) signaling circuit. An alarm output relay indicates that FACP input is triggered. LEDs indicate output and fire alarm disconnect status.

The units are designed to be powered by one common power source that can provide power for both the unit's operation and locking devices; or by two totally independent power sources, one to operate the unit and the other for lock/accessory power. 

For more information on Altronix’s extensive line of products visit http://www.altronix.com

About Altronix
Altronix is a leading designer & manufacturer of quality low voltage electronics for Security, Fire, CCTV, Access Control, Nurse Call, and Automation markets that deliver more than just power. Altronix extensive line includes Power Supply/Chargers, Battery Enclosures, Timers, Controllers, DIN Rail products, NAC Power Extenders, Transformers, Rechargeable Batteries, Relay Modules, Siren Drivers, Snap Track products, Power Distribution modules, and Automation products. Altronix also provides Custom Electronic Product Design and Assembly. All Altronix products carry a lifetime warrantee and are manufactured in the U.S.

- Ends -

IMPORTANT: No material may be reproduced, copied or redistributed from this site,
without the express written consent of doktorjon.co.uk

All the detailed information on this site is provided in good faith; as such, Doktor Jon does not accept responsibility for any consequential loss, injury or disadvantage resulting from any individual or organisation acting on the details contained herein.

© doktorjon.co.uk 2004 - 2009

Homepage...:...Gateway...:...Technical Gateway....:....Quickfind Index....:....Equipment Directory
Site Index...:...About this site....:....CCTV Helpdesk....:.... The Forum ....:....Contact Doktor Jon